SciScan 1.4 Release Notes

New features: Windows 10 compatibility SciScan 1.4 now runs on LabVIEW 2018 and is fully compatible with the newest Windows 10 version. Piezo Z Positioning (All systems) The user has the option to define the Z-volume using the Piezo actuator instead of the stage. This is useful in applications that […]

GG-GG Wiring diagram

PXI chassis (PXIe-1073) The PXI chassis is the bases of the data acquisition and will be equipped with different modules, depending on the selected HyperScope DAQ-Package: Front Panel PXI chassis front panel Module slot Equipped module name Module description Function 1 (empty) n/a n/a 2 (empty) n/a n/a 3 PXIe-6341 Multifunction […]

RGG Wiring diagrams

PXI chassis (PXIe-1073) The PXI chassis is the bases of the data acquisition and will be equipped with different modules, depending on the selected HyperScope DAQ-Package: Front panel PXI chassis front panel Module slot Equipped module name Module description Function 1 (empty) n/a n/a 2 PXIe-7961R PXI + NI-5734 FPGA Module […]

RG-GG Hyperscope Wiring

PXI chassis (PXIe-1073) The PXI chassis is the bases of the data acquisition and will be equipped with different modules, depending on the selected HyperScope DAQ-Package: Front pannel PXI chassis front panel Module slot Equipped module name Module description Function   1 (empty) n/a n/a 2 PXIe-7961R PXI + NI-5734 FPGA […]

RGG-GG Wiring Diagram

PXI chassis (PXIe-1073) The PXI chassis is the bases of the data acquisition and will be equipped with different modules, depending on the selected HyperScope DAQ-Package: PXI chassis front panel Module slot Equipped module name Module description Function   1 (empty) n/a n/a 2 PXIe-7961R PXI + NI-5734 FPGA Module for […]

SciScan 1.3 Release Notes

New Features: Installation (All systems) The Confirm INI settings have been rewritten to improve user experience and installation procedure, either when installing or upgrading. Graphical User Interface (All systems) To cater for the new range of Multiphoton systems from Scientifica that propose two simultaneous light paths, the software is started […]

Piezo Z-positioning module

This module has been designed to allow the use of the Piezo objective positioner to do volume scanning. It is important to keep in mind that this module does not take into account any bias voltage applied to the device. Purpose Perform 2D scans from the main GUI with an […]

Legacy Photostimulation module

A description of the Plugin can be found here: Photostimulation module In case you want to use the Legacy Photostimulation described here, it is still possible, please contact your Scientifica representative. A description of the Standard Plugin can be found here: Photostimulation module SciScan’s uncaging module allows users to perform point stimulation or […]

3.b – INI Setup for SciScan 1.3

SciScan includes a small program to help make setting up the .ini file for first use or when upgrading to a new version, called confirmINIsettings.vi. This is located in the INI folder of the LabVIEW Project File. Please note: confirmINIsettings.vi should only be run from within the SciScan Project. First, launch Sci_Scan.lvproj and run the vi from within […]

Photostimulation Module

Overview Label Name Function A Image display area Displays image based on selected tab (G) and allows to add free-hand stimulation points (point and click) B 3×3 stimulation grid Use the Grid Parameters (S) to define stimulation grids C Free-hand stimulation points Example of a free-hand selection of stimulation points […]